Checklist before the first clean
- Check the curing and drying time for paint, grout, flooring and sealants.
- Read product care instructions for natural stone, glass and treated timber.
- Choose a vacuum and filter suitable for very fine construction dust.
- Remove loose particles before considering damp cleaning.
- Test each cleaning method on a small, inconspicuous area.
- Photograph unexplained damage or residue that may require the original contractor's attention.
Newly renovated rooms may contain cement, adhesive, sanding particles and paint residue. There is no universal cleaner suitable for every material. Matte paint can be burnished by scrubbing, and acidic products may damage some stones or grout. If the manufacturer's instructions are unclear, stop and seek material-specific advice rather than using a stronger chemical.
For an assessed cleaning job, see post-construction cleaning in Oslo. This article is general maintenance guidance and cannot replace a site-specific assessment.
